This chipset/vga cooler has both push-pins and a thermal adhesive pad to insure complete compatibility. Remember to peel off the backing before installation.
- Aluminum heatsink: 45mm x 12mm
- Fan Bearing: Sleeve Bearing
- 5000 RPM
- Voltage: 12VDC
- 2-pin Mini connector
- Cable length: about 3"
- Includes push pin for quick and easy installation
ALTHOUGH IT'S ROUND, NOT SQUARE, THE THUMBNAIL IMAGE ABOVE SHOWS THE LAYOUT THE HEATSINK IS BASED ON
This heatsink has a mounting pitch of 54.6mm; that's the distance between the centers of the 2 mounting holes. Note that the mounting holes should not line up directly in the corners. Measure if you're not sure.
NEW. Bulk Packaged